|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This page is dedicated to all of Pintech's and my customers. A sincere THANK YOU!!! Thanks to everyone who has sent in a picture! With Pintech the possibilities are endless!! If you would like to have your kit posted here, please email me. Brian
Tim's Kit
Tim is using a Pintech customized kit, upgraded with Zenbals and 12" pads. Basically an E-Session on an E-Jam rack.
 |
 |
Dave's Kit
This is Dave's kit...he is using a Road Pro in black with Trans Blue VisuLites and SilenTrim on all of the drums. He added an extra 8" and 10" tom and a 13" crash. It is powered by a Roland TD20 and is being ran through a Roland PM-3. Hopefully we'll talk Dave into sending us one with him in action on this bad boy! What a kit!!!!
Wes's Kit
This kit started out life as a Yamaha DTXtreme II kit. Wes has pulled the rubber pads and replaced them with 2-8" Pintech ConcertCast Pads, 2-10" Pintech ConcertCast Pads, 2-12" ConcertCast Pads and is using 2-10" Pintech CKV Bass Pads. The cymbals are the original Yamaha, with a Yamaha DTXtreme II module and a Roland PM3.....Wes, that's one heck of a kit!!! Wes sent me some updated pictures 10/10/07. He has added even more goodies to his kit!! AND...he painted them a nice custom red!
 |
 |
 |
 |
Jack's Kit
Another kit that started out as a Yamaha DTXtreme II. Jack's website is crazy!! His kit consists of the following: 2-Yamaha DTXtreme IIs Drum modules, Yamaha DTXtreme IIs tubular rack, Yamaha DTXpress III tubular rack, Yamaha RS100 rack system (original DTXtreme1 rack) (for parts), Pintech AX14 dual zone chrome snare, 2-Pintech 10" dual zone ConcertCast toms, 2-Pintech 12" dual zone ConcertCast toms, Pintech CKV-12" bass, 4-Yamaha 3 zone TP100 toms, Yamaha 3 zone TP120SD snare, Yamaha PCY130 single zone cymbal, Yamaha PCY130S dual zone cymbal, Yamaha PCY150S 3 zone cymbal, 4-Yamaha TP65 toms, Yamaha TP65S DTXpress 3 zone snare, 3-Yamaha PCY65 single zone cymbals, Yamaha PCY65S dual zone cymbal, Yamaha RHH130 hi-hat and Yamaha hi-hat stand, DW-7000 double kick pedal, Yamaha HH65 hi-hat pedal from DTXpress, Gibraltar snare stand, 2-Gibraltar rack mounts, 2-Dixon rack mounts, Tama hi-hat stand (spare), Tama throne w/backrest. Jack has removed the following from the original kit: DTXpress III module (replaced by the 2nd DTXtreme IIs), 2-Yamaha KP65 Kick pads, Yamaha Pro single kick pedal.
Ernie's Kit
This is another nice kit that started out as a Yamaha DTXtreme II. The toms have been replaced with Pintech EZ Tune ConcertCast drums sizes 8, 10, 10". He also added a Kit Toys brand 10" Splash Cymbal. The snare is the original 3 zone Yamaha snare and the rest of the kit is all Yamaha.
 |
 |
Steve's Kit
This is one of Pintech's T-Rex Kits powered by a Roland TD-12 Module. Steve has added another VisuLite cymbal and is soon to add 2-18" Chinas!! Great looking kit Steve!!
Jeff's Kit
This kit features 2-Roland PD100's with Pintech SilenTech heads, 2-Roland PD120's with Pintech SilenTech heads, Roland KD120, Pintech AcousTech AX14S snare. All of the cymbals are PC's 10", 2-14", 2-16", 2-18" and the newer PC14HH. The drum rack is a combination of Yamaha and Gibraltar.
 |
 |
Randy's Kit
Randy picked up a basic E-Gig kit for his studio....These kits are very practical for studio use or for someone who is wanting to learn electronic drums. Very basic drums, high quality at an affordable price!! Randy will be adding another drum and upgrading the cymbals soon!! NICE studio Randy!!!!!!
 |
 |
Gavin's Kit
This is one of Pintech's first mesh head kits, the Studio Elite. They featured single zone toms, similar to today's CC101ST pads, but the foam inside was shaped like a large pyramid instead of the cylinder. The dual zone snare was dual piezo, but was not using a stereo jack, you had to have 2 mono cables, one jack on either side of the knob. The kick drum was a 10" mesh head and was super sturdy! All of the cymbal pads were SE-102 dual zone chokable cymbal pads. And as you can tell, the heads were white!!
Jeremy's Kit
This kit was originally purchased new at the end of 2001; Jeremy bought it on eBay in 2007 and it still looks brand new!! It is one of Pintech's original Tour Elite kits with the SE-102 dual zone rubber pads for cymbals, the AcousTech snare is the 13" model, not the newer 14" version...(I think they should have stayed with the 13", but who am I to make that call) All of the toms are single zone CC101ST-TE. The kit originally came with 4 toms, but 2 more have been added to make this a monster! This is one of the nicest and most well kept Tour Elite kits that I have seen recently!!
Moose's Kit
Moose's kit is a little different than any other Pintech kit that has been sent to me....He calls it the Pintech Drumtree and you can see why! It uses 7 Pintech Dingbats, powered by an Alesis DM Pro. The "in action" picture shows him using the kit on stage with Xcel's Glow-in-Blacklight power sticks.
 |
 |
Kevin's Kit
Kevin's kit is a Pintech T-Rex with the added EZ Tune System. He has also added a VisuLite China and Splash. The kit is powered with a Roland TD20 module. Kevin has been blessed with the opportunity to get 2 T-Rex kits, one for home and one for church. He sent me this mp3 sound file of one of his kits in action!
|
|
|
Dr. Ron's Kit
(different Ron from above)
Ron's kit is one of a kind!
It is all mounted on a Roland MDS-10 Tour (One-off ribbed oddity rack, never
made in this color). He is using 2 (Separated) DW5002 AT3 Bass Pedals, DW/PDP
B.O.A. Flex Hi-Hat Stand and a Tama Road Pro Snare Stand. His drums are all
Pintech and include: 1 AX14s Snare Dual Zone, 2 CKV12" Bass Drums, 1 10"
ConcertCast Tom Dual Zone, 2 12" ConcertCast Toms Dual Zone and 2 14" AX14s
Floor Toms Dual Zone. His cymbals are all VisuLites: 10" Splash, 13" Hi-Hat
Cymbals, 14" Crash, 14" Crash, 16" Crash, 16" China, 18" Ride 3 Zone and an 18"
China.
Joe's Kit
Joe's kit is a Tour Elite that has been expanded....more to follow.....
